I have been working as a Liverpool boiler specialist and gas Engineer since 1988. At that time the governing body was CORGI. The Council of Registered Gas Installers.
CORGI was replaced with the Gas Safe Register as the gas registration body in Great Britain and Isle of Man on 1 April 2009 and Northern Ireland and Guernsey on 1 April 2010.
So now the Gas Safe Register is the official gas registration body appointed by the relevant Health and Safety Authority for the United Kingdom, Isle of Man and Guernsey. It is the law all gas engineers must be on the Gas Safe Register.
The main focus of the Register is on improving and maintaining gas safety to the highest standards. They make sure all 125,000+ gas engineers on the Register are qualified to work with gas.
As a Liverpool boiler specialist I am registered with GAS SAFE and fully insured.
They work to protect the public from unsafe gas work through;
Gas Safe Register is run by Capita Gas Registration and Ancillary Services Limited, a division of Capita Plc.
So now you know What is Gas Safe? And as a Liverpool boiler specialist I know that we need them and so do the public to keep our families safe from harm…
So if you have any damp spots get them checked out before it’s to late and you end up with a Root damaged wall from a Leaking roof flashing.
The video below shows the same wall after we have removed the loose bricks and cleaned it up ready for rebuilding.
Although we are going into winter as I post this and I start focusing more on boiler servicing and repairs you can still contact me for the other services we provide including plumbing. heating, drainage and building maintenance….even for repairing a Root damaged wall from a Leaking roof flashing
I hope you liked the videos about the Root damaged wall from a Leaking roof flashing that I posted above.
Feel free to contact me for help and advice just click on contact us for all the ways you can get in touch 🙂
We are based in Litherland Liverpool and this is what we have found.
Radiators can rust inside producing black iron oxide known as ‘sludge’. This sludge moves around the blocking pipes, valves and boilers (pumps/heat exchangers/diverter valves) causing all sorts of problems including:-
The solution is to Powerflush a Central Heating System and treat with corrosion inhibitor.
flush equipment, normally set up outside, connects to your and cleans the whole without having to take off all the radiators. WE normally just remove one radiator and do it all from there.
flush cleaner is added to the water and starts to loosen the rust. The is turned on and radiator surfaces checked for cold spots. By water through each radiator and vibrating cold spots the sludge inside is rapidly loosened. The sludge flows from radiators and is pumped out of the and replaces with clean fresh water.
All pipe-work, radiators and the boiler are flushed until water samples are clean and free from sludge and other deposits or debris
An effective corrosion inhibitor is added to the fresh clean water in the CH , radiators are balanced as required and checked that are all up correctly.
As you will find out I and my team are professional and friendly and will thoroughly flush your whole heating system providing you with :
I hope the above information helped you understand all about why you need to Powerflush a Central heating System in Liverpool and surrounding areas,
For more information on sludge in your follow this link >> Sludge
I look forward to chatting with you about how we can help.
For an Instant FREE quote to flush a in Liverpool
Call Andy on 07831 564351
For other ways to contact me click on the image below.